- 型号搜索
- 交叉搜索
- 关键词搜索
- 参数搜索
- 库存查询与购买
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
请输入3个以上字符
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
请输入3个以上字符
Is it possible to identify the heating point when several PTC thermistors are connected?
It is not possible to identify the heating point when several PTC thermistors are connected.
The TCTH0 Series IC supplies a small amount of constant current to PTC thermistor, detects changes in resistance/temperature, and generates a FLAG (Hi/Low).
When several PTC thermistors are connected, the change in the combined resistance of several PTC thermistors is detected, making it impossible to identify the specific heat generation point.
Related Links
The following documents also contain related information.
常见问题（FAQ）
Application Notes
e-Learning
Catalog
