型号搜索

交叉搜索

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

关键词搜索

参数搜索

库存查询与购买

选择产品种类

选择应用

查找您下一个设计所需要的一切。只需选择一个应用,然后单击以查看框图,即可找到我们的半导体解决方案。

电平转换器

随着电子元件速度日益提升、愈加复杂化和小型化及其能耗的日益降低,核心LSI正采用精细工艺来降低电压。另一方面,外围IC也需要满足各个外围设备模块之间的接口标准,并且仍需在5V或3.3V下运行。在同一块电路板上连接不同电源电压的产品时,可能存在输入电压不满足信号接收端标准的情况,从而可能导致器件故障或损坏。使用电平转换器可避免故障。

产品线

Direction of data transmission
Number of Circuits
Package name
Results:
unit:

All package dimensions are guaranteed in millimeters as mentioned on datasheet. Package dimension in inches is round to 2 significant digits converted with 1mm=0.0393701inch.

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

为什么需要电平转换器?
如果连接不同电平信号的I/O,驱动IC的输出电压电平可能不满足接收器的输入电压规格,从而导致器件故障或损坏。
为什么需要电平转换器?
双电源电平转换器
如果需要精细的信号电平转换或双向电平转换,则双电源电平转换器即为适用的理想器件。
双电源电平转换器

文档

名称 日期

仿真器

联系我们

技术咨询

联系我们

联系我们

常见问题

常见问题(FAQ)
在新窗口打开