This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
请输入3个以上字符
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
请输入3个以上字符
Toshiba’s reference design is shown below.
This figure shows the reference design available on Toshiba’s website.
It has two PTC thermistors: one with a critical temperature of 80°C and the other with a critical temperature of 105°C.
When temperature is low, the blue LED is lit up. When the temperature of at least one of the PTC thermistors reaches its critical temperature, the red LED is lit up.
Let’s watch a video showing the operations of the reference design.
Click the link below to go to the reference design page.
* Thermoflagger™ is a trademark of Toshiba Electronic Devices & Storage Corporation.
* Other company names, product names, and service names may be trademarks of their respective companies.