- 型号搜索
- 交叉搜索
- 关键词搜索
- 参数搜索
- 库存查询与购买
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
请输入3个以上字符
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
请输入3个以上字符
若静电施加到逻辑引脚上会对器件产生什么影响？该如何处理？
当静电施加到电机驱动IC的控制引脚时，输入电路可能会受损或毁坏。
通常，电机驱动IC输入引脚使用的氧化膜非常薄（几纳米级），因此当施加几百至几千伏的静电时，器件就会受损或毁坏。
虽然我们的器件为每个输入引脚都集成了浪涌保护电路／元件，但这并不能保证器件在任何情况下都不会损坏。请避免将静电直接施加到器件上。
处理半导体产品时，请确保环境不受静电影响。操作员应穿戴防静电服、防静电鞋和防静电手环。此外，与半导体产品直接接触的容器和其他物体应由不会产生静电的材料制成，以免造成损坏。
始终控制防静电设备，确保其正常工作。操作带有静电放电（ESD）警告标签的半导体器件时必须格外小心。
关于一般静电对策，请参阅以下页面。
相关链接
以下文档也包含相关信息。
