- 型号搜索
- 交叉搜索
- 关键词搜索
- 参数搜索
- 库存查询与购买
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
请输入3个以上字符
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
请输入3个以上字符
如果使用级联LED驱动电路，SCK波形变钝，是否会有问题？
可能会引起故障。
如果为防范电磁波和噪声而使SCK信号波形的上升沿和下降沿变钝，则无法确保SIN与SCK之间的建立保持时间，并且可能无法正常执行数据传输。请遵守详细规范的操作条件中定义的SIN与SCK之间的建立保持时间。
相关链接
以下文档也包含相关信息。