Asia-Pacific
English
简体中文
繁體中文
한국어
日本語
Americas
English
Europe (EMEA)
English



型号搜索

交叉搜索

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

关键词搜索

参数搜索

库存查询与购买

寄存器配置

寄存器配置

Cortex®-M3处理器具有R0至R15寄存器。
R0至R12是通用寄存器。
R13是可配置区域的寄存器,可以在两种堆栈指针之间切换
R14是链接寄存器,R15是程序计数器。
此外,还有控制Cortex®-M3处理器特殊功能的特殊寄存器。

第Ⅱ章:Arm® Cortex®-M3

硬件配置
NVIC(嵌套中断向量控制器)
寄存器的作用
PC、LR
堆栈指针
堆栈指针的入栈/出栈
特殊寄存器
操作模式和堆栈指针(1)
操作模式和堆栈指针(2)
异常(复位、中断、故障、系统调用)
NVIC的作用
NVIC尾链控制
存储器映射
Arm®Cortex®-M3规格的存储器映射
TMPM330的存储器映射:TX03系列示例
向量表(1)
向量表(2)
位带区和位带别名区(1)
位带区和位带别名区(2)

* Arm和Cortex是Arm有限公司(或其子公司)在美国和/或其它国家的注册商标。

在新窗口打开