- 型号搜索
- 交叉搜索
- 关键词搜索
- 参数搜索
- 库存查询与购买
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
请输入3个以上字符
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
请输入3个以上字符
如何用16位数据总线连接微控制器，用16位数据总线连接NOR闪存?
当用16位数据总线连接微控制器和用16位数据总线连接NOR闪存时，将微控制器的地址端口引脚A1连接到NOR闪存的地址端口引脚A0，将微控制器的A2连接到NOR闪存的A1，以此类推。不使用微控制器的地址端口引脚A0。这是因为尽管NOR闪存地址是按字节分配的，但只访问偶数地址（地址0、地址2、地址4等）。
连接示例
下面是TMP92CF29A与16位NOR闪存之间连接的示例。
连接示例
下面是TMPM341FXBG与16位NOR闪存之间连接的示例。
*在进行实际连接之前，请确保检查您所使用微控制器的规格书以了解具体细节。
（NO.EB9900401 2011/11/01）