- 型号搜索
- 交叉搜索
- 关键词搜索
- 参数搜索
- 库存查询与购买
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
请输入3个以上字符
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
请输入3个以上字符
在将“on”（导通）信号施加至CONTROL端后，能否施加输入电压？
如需在向CONTROL端施加“on”（导通）信号后施加输入电压，请使用具有输入容限功能的负载开关IC。当CONTROL端的电压高于VIN终端或VIN＝0V时，输入容限功能可阻止电流从CONTROL端流向VIN终端。对于不具备输入容限功能的负载开关IC，需在施加VIN之后施加CONTROL信号。
关于输入容限功能的描述，请参阅以下文档和网页：
欲搜索适用于CONTROL端且具有输入容限功能的负载开关IC的参数，请点击：
其它负载开关IC：