请输入3个以上字符
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
输入电压 | AC 90至264V |
---|---|
输出电压 | DC12V |
输出功率 | 0.8kW(AC 100V系统输入), 1.6kW(AC 200V系统输入) |
电路拓扑 | 无桥PFC、移相全桥+同步整流、输出用O形环路 |
“设计・文档”包括下列文档。
*1:实际PCB是在CR5000BD上设计的。
其它文件是由CR5000BD文件制作。
*2:数据在CR5000BD上生成。
器件型号 | 器件目录 | 搭载部位・数量 | 说明 |
---|---|---|---|
TK25N60X | MOSFET | PFC・4 | DTMOSIV/600V/140mΩ(最大值)@VGS=10V/高速开关类型/TO-247 |
TRS8E65F | SiC肖特基二极管 | PFC・2 | 第2代/650V/8A/TO-220-2L |
TK25N60X5 | MOSFET | 初级侧・4 | DTMOSIV/600V/140mΩ(最大值)@VGS=10V/高速开关类型/高速二极管类型/TO-247 |
TPH3R70APL | MOSFET | 次级侧・8 | U-MOSIX-H/100V/3.7mΩ(最大值)@VGS=10V/高速开关类型/SOP Advance |
TPHR9003NC | MOSFET | O形环・10 | U-MOSVIII/30V/0.9mΩ(最大值)@VGS=10V/SOP Advance |
TLP2767 | 光耦 | 初级侧和次级侧之间的通信・4 | 用于高速通信/50Mbps/图腾柱输出(INV)/5引脚SO6L |