Asia-Pacific
English
简体中文
繁體中文
한국어
日本語
Americas
English
Europe (EMEA)
English



型号搜索

交叉搜索

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

关键词搜索

参数搜索

库存查询与购买

3.5英寸硬盘-底部安装孔的位置

底部安装孔的位置

底部安装孔的位置与下图1和图2不同。

Form Factor of 3.5" Disk Drive

注:
来自行业标准小封装(SFF)委员会的SFF-8301规范定义了3.5英寸外形规格磁盘驱动器的尺寸。
SFF-8301定义了三对底部安装孔如下:.

资料来源:SFF委员会,SFF-8301 3.5"磁盘驱动器外形规格规范Rev1.6
2010年3月16日

"需要按尺寸A7定位的一对底部安装孔。需要另外一对按尺寸A6或位尺寸A13定位的一对底部安装孔。允许提供所有三对安装孔(按尺寸 A7、A6和A13定位)。"

3.5”磁盘驱动器尺寸
在新窗口打开