How to Use a Photocoupler Check

Step 4. Check each constant.
Consider whether there is sufficient margin for operating temperature, speed, lifetime design, tolerance of resistor, etc.

How to Use a Photocoupler Check

Temperature range ⇒ VF, CTR, allowable current, etc.

Load resistance ⇒ switching speed, influence of dark current, etc.

Allowable current
Allowable current
CTR-Ta
CTR-Ta
Dark current
Dark current
Switching time -RL
Switching time -RL

Confirmation of lifetime of the set

The optical output of the input LED of photocoupler decreases with the passage of time.

It is necessary to confirm that the characteristics are satisfied, for which purpose this deterioration during the lifetime target of the set must be included.

The aging variation of the optical coupler can be calculated from input current (IF) and ambient temperature.

Confirmation of lifetime of the set

Chapter V : Optical Semiconductors

Types of Optical Semiconductors
Light-Emitting Principal of LEDs
The wavelength range of LEDs
What Is a Photocoupler?
Why Are Photocouplers Necessary?
Types of Photocouplers
Types of Photocouplers (Packages)
Types of Photocouplers (Internal Structure)
Safety Standards of Photocouplers
Characteristics of Photocouplers (Current Transfer Ratio: CTR)
Principal Characteristics of Photocouplers (Trigger LED Current)
Aging Variation Data of Photocouplers
How to Use a Photocoupler
How to Use a Photocoupler “Input Current”
How to Use a Photocoupler “Output Current”
How to Use a Photocoupler “Output-Side Resistor”

Related information

A new window will open