Inrush current reduction circuit

Inrush current reduction circuit

Inrush current reduction is a function that suppresses the inrush current generated during switching with the slew rate control driver circuit (slow start circuit) built into the load switch IC. If the inrush current at each transient switching time increases significantly in the case where more than one power source is supplied from the PMIC, it may temporarily exceed the current capacity of the PMIC, causing a malfunction such as shutdown or system trouble. In order to prevent such a situation, it is necessary to suppress the inrush current.

We mass-produce load switch ICs with multiple slew rate control functions. If the output capacity is large, the inrush current (rush current) can be kept low by using the product with a slow slew rate (SRC3 in the figure above). On the other hand, if a fast VOUT start-up is required, the power supply can be controlled optimally by using products with a fast slew rate (SRC1 in the figure above).

Load switch IC built-in inrush current reduction function

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의

Queries about purchasing, sampling and IC reliability

재고 확인 및 구매

keyword:

Disclaimer for External Link
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.