M360 Group Sample Software

This page provides a sample software download service for the M360 group.

TMPM361/362/363/364

Please check the function list, and download the appropriate file.

Function list

Function list for sample software.

Sample Software/Function Description Product Name
TMPM
361
TMPM
362
TMPM
363
TMPM
364
Analog/Digital converter ADC Example of reading ADC data from analog input pins V V V V
CAN controller CAN Example of the test loop back mode, such as mailbox message setting, mailbox configuration, message transmission/receiving, mode change (test loop back mode) status getting and usage for interrupt     V V
CEC function CEC Example of CEC transmission / reception interrupt V V V V
Clock/Mode control CG Switching example between NORMAL mode and SLEEP mode V V V V
DMA controller DMAC Example of DMAC settings and data transfer between the memories V V V V
Flash control FLASH Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory V V V V
I/O port GPIO Usage example of Port using LEDs and KEYs V V V V
Key-on wakeup KWUP

Example of enter and release low power mode

V V V V
Remote control signal preprocessor RMC Example of receiving the signals of remote control and decode V V V V
Real-time clock RTC Configuration example for date and time V V V V
Serial bus interface SBI Example of transmission / reception in I2C bus mode V V V V
Static memory controller SMC Example of SRAM initialization V V V V
Serial channel SIO/UART Example of UART configuration and transmission V V V V
Synchronized serial interface SSP Configuration example for SSP and self-loop back V V V V
16-bit timer TMRB Example of timer interrupt that runs every 500 ms
Output example of duty-variable PPG (programmable square wave)
V V V V
Watchdog timer WDT Example of the detection time and the processing after the detection for watchdog timer V V V V

Download

Please Select the appropriate file for download.

Name

TMPM365/366

Please check the function list, and download the appropriate file.

Function list

Function list for sample software.

Sample Software/Function Description Product Name
TMPM
365
TMPM
366
Analog/Digital converter ADC Example of reading ADC data from analog input pins V V
Clock/Mode control CG Switching example between NORMAL mode and STOP mode V V
DMA controller DMAC Example of DMAC settings and data transfer between memory and peripheral devices using the UART V V
External bus interface EXB Example of read / write of the SRAM that is connected to the external bus   V
Flash control FLASH Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory V V
Asynchronous Serial Channel FUART This program sends 64 different data values from TX pin and receives data from RX pin.   V
I/O port GPIO Usage example of Port using LEDs and KEYs V V
Serial bus interface SBI Example of transmission / reception in I2C bus mode V V
Serial channel SIO/UART Example of UART configuration and transmission V V
Synchronized serial interface SSP Configuration example for SSP and self-loop back   V
16-bit timer TMRB Example of timer interrupt that runs every 500 ms
Output example of duty-variable PPG (programmable square wave)
V V
USB Device Controller USBD HID (Human Interface Device) Mouse Demo
Once the evaluation board is connected via USB interface to PC and then powered on , it will be recognized as a standard USB mouse and then it controls the arrow icon on PC screen as shown below, and this process will be repeated 3 times
V V
CDC (communication device class) Loopback Demo
On the evaluation board, a simple CDC demonstration program was designed to serve as a COM device in a simulation.
V V
MSC (Mass Storage Class) RAM disk Demo
Once the evaluation board is connected via USB interface to PC and then powered on, it will recognize 24 k RAM Disk. You can format it by the computer and save files to it.
V V
Watchdog timer WDT Example of the detection time and the processing after the detection for watchdog timer V V

Download

Please Select the appropriate file for download.

Name

TMPM367/368/369/36B

Please check the function list, and download the appropriate file.

Function list

Function list for sample software.

Sample Software/Function Description Product Name
TMPM
367
TMPM
368
TMPM
369
TMPM
36B
Analog/Digital converter ADC Example of reading ADC data from analog input pins V V V V
CAN controller CAN Example of the test loop back mode, such as mailbox message setting, mailbox configuration, message transmission/receiving, mode change (test loop back mode) status getting and usage for interrupt   V V  
Clock/Mode control CG Switching example between NORMAL mode and IDLE/STOP1/STOP2 mode V V V V
Digital/Analog converter DAC Output example of sawtooth waveform from the DA pin V V V  
External bus interface EXB Example of read / write of the SRAM that is connected to the external bus V V V V
Encoder Input Circuit ENC This example detects the rolling of mouse wheel. V V V V
Flash control FLASH Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory V V V V
Asynchronous Serial Channel FUART This program sends 64 different data values from TX pin and receives data from RX pin. V V V V
I/O port GPIO Usage example of Port using LEDs and KEYs V V V V
Multi-Purpose Timer IGBT This example program demonstrates how to use external trigger to control the PPG output by IGBT driver and EMG function. V V V V
PMD This example demonstrates the phase outputs. V V V V
Low Voltage Detection Circuit LVD If Voltage is higher than the detection voltage, UART displays "UPPER". When Voltage is lower than the detection voltage, UART displays "LOWER". V V V V
Oscillation frequency detection OFD Example of generate a reset for I/O, when the clock exceeds the OFD detection frequency range V V V V
Remote control signal preprocessor RMC Example of receiving the signals of remote control and decode V V V V
Real-time clock RTC Configuration example for date and time V V V V
Serial bus interface SBI Example of transmission / reception in I2C bus mode V V V V
Serial channel SIO/UART Example of UART configuration and transmission V V V V
Synchronized serial interface SSP Configuration example for SSP and self-loop back V V V V
16-bit timer TMRB Example of timer interrupt that runs every 500 ms
Output example of duty-variable PPG (programmable square wave)
V V V V
μDMA controller uDMAC Example of DMAC settings and data transfer between the memories V V V V
USB Device Controller USBD HID (Human Interface Device) Mouse Demo
Once the evaluation board is connected via USB interface to PC and then powered on , it will be recognized as a standard USB mouse and then it controls the arrow icon on PC screen as shown below, and this process will be repeated 3 times
V V V  
CDC (communication device class) Loopback Demo
On the evaluation board, a simple CDC demonstration program was designed to serve as a COM device in a simulation.
V V V  
MSC (Mass Storage Class) RAM disk Demo
Once the evaluation board is connected via USB interface to PC and then powered on, it will recognize 24 k RAM Disk. You can format it by the computer and save files to it.
V V V  
Watchdog timer WDT Example of the detection time and the processing after the detection for watchdog timer V V V V

Download

Please Select the appropriate file for download.

Name

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs
A new window will open