请输入3个以上字符
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
请输入3个以上字符
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
器件型号 |
||
---|---|---|
内核 | Arm® Cortex®-A9 MPCore |
|
最大工作频率 | 300MHz | 600MHz |
FPU(浮点单元) | 集成 | |
RAM | 1MByte SRAM 32kByte SRAM(用于备用) |
|
DRAM控制器 | DDR3/DDR3L×16位 | |
外部扩展总线接口 | 地址:27位、数据:32位 | |
图形加速器 | 东芝原创的2D图形加速器 | |
LCD控制器 | WVGA(800×480像素)60fps、24位并行I/F | |
高速接口控制器 | USB2.0主机接口、USB2.0设备接口、10/100以太网MAC | |
外围功能 | DMA控制器、定时器/计数器、RTC | |
外围 | 相机I/F,UART×4,I2C×4,I2S×2,SPIM×7,SPIB×2,PWM×6,12bitADC×4,SDIO×3,e-MMC×1,GPIO | |
电源电压 | 内核=1.1V,I/O=3.3V | |
封装 | LFBGA 310引脚,16mm×16mm,0.8mm间距 | |
状态 | 量产 |
TZ2100XBG | TZ2102XBG | ||
---|---|---|---|
设置举例 | 使用媒体I/F | 使用外部总线I/F | 使用外部总线I/F |
CPU | Cortex®-A9 300MHz+FPU L1I$ 32kB/L1D$ 32kB,L2$ 128kB |
Cortex®-A9 600MHz+FPU L1I$ 32kB/L1D$ 32kB,L2$ 128kB |
|
图形 | 2D图形(BitBLT) | - | - |
DRAM I/F | DDR3/3L×16位 | DDR3/3L×16bit | |
SRAM | 1MB 备用32kB |
1MB 备用32kB |
|
相机I/F | 8位并行相机I/F | - | - |
外部总线I/F | - | A=27位,D=32位/16位/8位 | A=27位,D=32位/16位/8位 |
LCD I/F | WVGA 60fps |
- | - |
USB ※专用 |
USB2.0主机/设备1通道(可选) | USB2.0主机/设备1通道 | |
以太网 | 10/100以太网 | - | - |
RTC | 1 | 1 | |
SPIM(SPITX) SPIB SPIS |
- 2通道 1通道 |
7通道 - - |
7通道 - - |
UART/PPI | 3通道 | 4通道 | 4通道 |
PWM | 6通道 | 6通道 | |
I2C | 4通道 | 2通道 | 2通道 |
I2S | 2通道 | 2通道 | |
定时器 WDT DMAC |
32位×9通道 1通道 8通道 |
32位×9通道 1通道 8通道 |
|
ADC | 4通道 | 4通道 | |
SDIO/e-MMC/SD Card | 3通道 | - | - |
GPIO(MAX) | 128通道(专用4通道+公用124通道) | 128通道(专用4通道+公用124通道) | |
封装 | BGA 310引脚(16mm×16mm,0.8mm间距) | BGA 310引脚(16mm×16mm,0.8mm间距) |
TZ2100参考板是一种开发入门套件,包括用于评估TZ2100性能、软件急切评估和原型制作的评估板,通常与BSP(板支持包)结合使用。
评估板分为两种类型的板,一种可使用相机/LCD显示器,另一种可使用娱乐设备接口。至于BSP,根据不用的客户用途,有两种操作系统可供选择。
运输编号 | RBTZ2100-1MA-A1 |
---|---|
CPU | |
概览 | ![]() |
尺寸 | 150mm×130mm |
主要功能 | CPU RAM ROM microSD card slot×1 调试UART×2(micro USB) 以太网10/100Mbps×1 音频 USB主机/设备 8位并行相机I/F×1 WVGA 60-fps 24位并行LCD I/F×1 电源 DC 5.0 V |
购买/租赁方式 | 请联系我们的销售部门 |
器件型号 | 操作系统 | 分配 | 设备驱动器 |
---|---|---|---|
RBTZ2100-1MA-A1 RBTZ2100-1MA-A2 |
Linux® (Ubuntu®14.04 Arm hf) |
gcc | 以太网,UART,SPIB,I2C,Audio,GPIO,SPIM,USB(EHCI/OHCI),e-MMC,内存分配器,SD/SDIO |
μ-ITRON | µC3/标准(eForce Co., Ltd.)*2 |
以太网,UART,SPIB,I2C,音频,GPIO,SPIM,内存分配器,SD/SDIO | |
RBTZ2100-2MA-A2 | - | IAR嵌入式工作台(IAR Systems®)*3 | UART,GPIO,I2C,SPIM,音频 |
库存查询与购买
请输入3个以上字符
* Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
* Other company names, product names, and service names may be trademarks of their respective companies.