请输入3个以上字符
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
我们的产品中嵌入了包含东芝电机控制知识的硬件解决方案(VE*1、RDC*2、APMD*3)。该解决方案有助于提高系统的功率、减小尺寸和提高效率。此外,通过为每个外设IP提供硬件故障检测机制,在不依赖软件的情况下不断监控微机的随机故障。在实现实时故障检测的同时,减少客户软件开发的工时。这些机制有助于实现车载系统所需的ASIL。
VE*1:矢量引擎
RDC*2:旋转变压器-数字转换器
APMD*3:高级可编程电机驱动器
器件型号 | TMPR454F10TFG | TMPM358FDTFG |
---|---|---|
CPU | Cortex R4 | Cortex M3 |
系统时钟 | 160MHz | 40MHz |
ROM | 1MB | 512KB |
RAM | 80KB | 80KB (*) |
工作电压 | 内核=1.5±0.15V;I/O=5.0±0.5V | 5.0±0.5V (内核功率由内部调节器调节) |
特点和功能 | 高级可编程电机驱动器(A-PMD):1单元 ・一次脉冲发生器 ・升压型PWM转换器 矢量引擎(VE) 旋转变压器/数字转换器(RDC):1单元 ・响应速度:±0.2°(10,000rpm) 励磁器:1通道 功能安全警报(每个IP) |
睡眠模式 RAM备份功能 唤醒功能 ・低速振荡:300kHz |
12位AD转换器 | 最多4个通道同时采样 ・12位AD转换器(4通道/3通道/3通道):3单元 ・12位AD转换器(11通道):1单元 |
10通道/单元:2单元 |
CAN控制器(Ver.2.0B) | 32邮箱/单元:3单元 | |
UART/SIO | 3单元 | 2单元 |
ESEI | 2单元 | 3单元 |
看门狗定时器 | 1单元 | |
时钟监视器 | 1单元 | |
封装 | HQFP144 (20mm×20mm,0.5mm引线间距) |
LQFP100 (14mm×14mm,0.5mm引线间距) |
工作温度(Ta) | -40至125 °C | -40至105 °C |
(*): 包括16 KB(用于备份)
库存查询与购买
请输入3个以上字符
* Arm和Cortex是Arm有限公司(或其子公司)在美国和/或其它国家的注册商标。
* 本文提及到的系统和产品名称可能是各自公司或组织的商标或注册商标。